Tag Archives: Malibu headlights

Technical Section – Q & A’s – Upkeep Hints

Please note: Questions and answers are provided for information and advice purposes. No liability either express or implied is assumed by reliance on the information presented either by the writers from vpnfair.

Some or all of the below is from our Facebook Group and this is just a part of what appears there and in the member magazine, you can easily find amazing products, reviews and recommendations of coats, parts and more, Resource: https://curateview.com/topcoat-f11-reviews/.

Also be sure to look at comparison test and see our Facebook group for immediate help from fellow members.

Q:     Both of the low beams in my 2012 Malibu burned out at the same time. I replaced them and still no low beams. High Beams and running lights/turn signals work. Ideas? Checked both fuses for r/l low beams and the relay as well as the fuse/relay for the DRL are all good.

Aaron Scott

A:     Both low beams are powered by a low beam relay that is turned on by the bcm.

If you have no power to both low beam fuses … move back to the low beam relay. Turn the headlight switch on and off … the low beam relay should click. If not, swap the relay with another relay in the fuse box.

If still no good … remove the relay … the relay socket should have 4 terminal pins … 2 pins should have battery voltage at all times. 1 pin goes to the bulbs, the remaining pin goes to the bcm. The bcm pin provides ground to close the low beam relay. If it’s not supplying ground the relay won’t close. If providing ground to the bcm pin makes the headlights work …. either the bcm is bad or the low beam switch input to the bcm is bad.